FS2002/FS2000/FSNav HSI Glass Gauge and Switch Set v. 1.3.0
FS2002/FS2000 only
=============================================================
HSI Glass Gauge without frames for use with any FS2002/FS2000
panel. Features FSNav GPS Modus and a set of switches to control
FSNavigator. All waypoints incl. ISECs and FIXes can be set
automaticly to the HSI. This feature requires FSNav v. 4.4
or higher, but the HSI also works stand alone. This version
fix the wrong wind speed value by using with FS2002.
Installation over a already installed 'HSI Glass Gauge and Switch Set'
======================================================================
Unzip only the 7 *.gau files to the ...\FS200x\Gauges folder.
First installation of the 'HSI Glass Gauge and Switch Set'
for the original B737 panel
==========================================================
Unzip all files to a temporary folder.
Copy all *.gau files to ...\FS200x\Gauges
and
Main_1024b.bmp to ...\FS200x\Aircraft\B737_400\Panel
Edit the file (make backup before!)
...\FS200x\Aircraft\B737_400\Panel\Panel.cfg
and replace the section [Window00].
I assume that it is the original one!
Usage
=====
The original HSI instrument and the NAV/GPS switch have
been replaced by the above changes.
The new NAV/GPS switch can select three modes:
NAV / FSNAV GPS / FS200x GPS
Note:
All FSNav functions are not available until you activate
FSNav the first time (F9) once in a FS session.
The Switch Set has five switches to control FSNav:
PLAN - toggles 'Fly Flightplan' on/off
M1M2 - toggles the FMS options 'Mode1' to 'Mode2' and back
HOLD - toggles 'Fly Holding' on/off
PREV - selects the previous waypoint of the flightplan (if
available)
NEXT - selects the next waypoint of the flightplan (if
available)
The intention of the M1M2 switch is to activate the option
'Set and Hold Heading' only in one of the two modes. If 'Fly
Flightplan' is activ you can change from manual to
automatic flight by switching M1M2. In both cases FSNav
sets the waypoints automaticly to the HSI.
Thanks
======
to Dai Griffiths and all additional creators of the
Gauge Creation tutorial.
Copyright and Distibution
=========================
This gauges are released as Freeware.
Copyright(C) Peter Beddig . All rights reserved.
The use of this software is at your own risk,
the author cannot be held responsable.